Product Features

  • Valve Regulated Lead Acid (VRLA) Battery
  • Maintenance-Free, Absorbent Glass Mat (AGM) Technology for Efficient Gas Recombination of up to 99%
  • Pure Lead Construction and Proprietary Elements
  • Designed for High-Rate UPS, Float Service Standby Power Applications
  • Built in Accordance with IEC 60896-21/22:2004 and UL1989 Recognized (MH14533)

Application Scenarios

  • Front-terminal long-duration backup for data centers
  • High-rate discharge UPS batteries
  • Front-access backup for large equipment rooms
  • Long-duration backup for telecom equipment rooms
  • High-rate backup for industrial control
  • Uninterruptible power for network equipment

Product parameters

  • Model:XPL9000FT
  • Voltage:12 Vdc
  • Nominal Capacity:9000W @5min-rate
  • Watts per Cell:2069.83 (30-Sec 1.67 VPC @ 25°C)
  • Watts per Cell:1403.33 (5-Min 1.67 VPC @ 25°)
  • Watts per Cell:907.67 (15-Min 1.67 VPC @ 25°)
  • Max. Charge Current:75.00 A
  • Max. Discharge Current:1900 A
  • Short Circuit Current:5102 A
  • Internal Resistance:1.86 mΩ
  • Terminal Type:I2 thread lead alloy terminal to accept M6 bolt
  • Terminal Torque:51.7±10.3 Kgf·cm / 44.9±9.0 Lbf·in / 5.1±1.0 N·m
  • Container Material:PP (UL 94-HB) standard, flame-retardant (94-V0) available upon request
  • Weight:69.50 / 153.22 kg / lb.
  • Length (L):558.0±2.5 / 21.97±0.10 mm / in
  • Width (W):126.0±1.5 / 4.96±0.06 mm / in
  • Height (H):323.0±2.5 / 12.72±0.10 mm / in
  • Design Life:Up to 10 years in standby service at 25°C; Eurobat (20°C): >12 years, Very Long Life
  • Float Charging Voltage:13.5 - 13.8 Vdc/battery
  • Equalizing Charging Voltage:14.4 - 15.0 Vdc/battery
  • Operating Temperature:discharge -15°C to 50°C; charge/storage -15°C to 40°C

Product details

The CSB XPL9000FT belongs to the XPL-FT series and is a 12V front terminal pure lead valve-regulated lead-acid battery using absorbed glass mat technology with a gas recombination efficiency of up to 99%, maintenance-free. This series targets high-rate UPS and data center standby power applications. The product is manufactured to IEC 60896-21/22:2004 and recognized under UL1989 (MH14533). In terms of electrical parameters, the XPL9000FT has a nominal voltage of 12 Vdc and a nominal capacity of 9000W @5min-rate (9.60V per PCS @ 25°C). Its power per cell is 2069.83 W/cell at 30 seconds 1.67 VPC, 1403.33 W/cell at 5 minutes 1.67 VPC, and 907.67 W/cell at 15 minutes 1.67 VPC. The battery's maximum charge current is 75.00 A, maximum discharge current is 1900 A, short-circuit current is 5102 A, and internal resistance is 1.86 mΩ. For charging and temperature characteristics, at 25°C the float charge voltage is 13.5 - 13.8 Vdc/battery and the equalizing charge voltage is 14.4 - 15.0 Vdc/battery. Operating temperature range: nominal 25°C, discharge -15°C to 50°C, charge and storage -15°C to 40°C. Self-discharge is less than 10% after 90 days at 25°C, storage is possible for up to 6 months, or up to 10 months with equalizing charge; a full charge is required before use, and if storage temperature exceeds 25°C, charge earlier. In terms of construction, the XPL9000FT uses a PP case (UL 94-HB), with a flame-retardant (94-V0) version available on request. The terminal is an I2 threaded lead alloy terminal that accepts an M6 bolt, with a recommended torque of 51.7±10.3 Kgf∙cm / 44.9±9.0 Lbf∙in / 5.1±1.0 N∙m. The battery weighs 69.50 kg (153.22 lb) and measures 558.0±2.5 mm long, 126.0±1.5 mm wide, and 323.0±2.5 mm high. In terms of design life, it reaches 10 years under standby float service at 25°C, meeting the Eurobat long life standard (greater than 12 years at 20°C). With its front terminal design and pure lead construction, the XPL9000FT is suitable for high-rate standby scenarios such as data center uninterruptible power supplies, providing reliable backup power support for critical equipment.
link
Go to purchase
Telephone
13775032303
email
powercube@foxmail.com
wechat
wechat
Loading...