CSB XHRL12650W 12V 650W Valve-Regulated Sealed Lead-Acid Battery
The CSB XHRL12650W is a 12V valve-regulated sealed lead-acid battery in the XHRL series, designed for high-rate float standby applications such as data center UPS. Nominal capacity 650W @ 15-minute rate, with 5-minute power of 1054.83 W/cell and 15-minute power of 651.83 W/cell. It uses AGM technology with gas recombination efficiency up to 99% and is maintenance-free. Design float life up to 10 years (25°C standby), and over 12 years at 20°C under the Eurobat standard. Case material is PP, with a flame-retardant version optional. Terminals are I2 threaded lead alloy terminals accepting M6 bolts.
Taobao store
WeChat procurement
Product Features
- Valve Regulated Lead Acid (VRLA) Battery
- Maintenance-Free, Absorbent Glass Mat (AGM) Technology for Efficient Gas Recombination of up to 99%
- Pure Lead Construction and Proprietary Elements
- Designed for High-Rate UPS, Float Service Standby Power Applications
- Built in Accordance with IEC 60896-21/22:2004 and UL1989 Recognized (MH14533)
Application Scenarios
- Very large data center UPS backup
- High-performance computing center backup power
- Cloud computing data center UPS
- Financial data center uninterruptible power supply
- Telecom hub high-rate discharge backup
- Industrial-grade UPS high-power backup
Product parameters
- Model:XHRL12650W
- Voltage:12 Vdc
- Nominal Capacity:650W @ 15min-rate
- Watts per Cell:1054.83 (5-Min 1.67 VPC @ 25°)
- Watts per Cell:651.83 (15-Min 1.67 VPC @ 25°)
- Max. Charge Current:65.00 A
- Max. Discharge Current:1350 (5sec)
- Short Circuit Current:4018 A
- Internal Resistance:2.33 mΩ
- Terminal Type:I2 thread lead alloy terminal to accept M6 bolt
- Terminal Torque:51.7±10.3 Kgf·cm / 44.9±9.0 Lbf·in / 5.1±1.0 N·m
- Container Material:PP (UL 94-HB) standard, flame-retardant (94-V0) available upon request
- Weight:47.90 / 105.57 kg / lb.
- Length (L):343.0±2.5 / 13.50±0.10 mm / in
- Width (W):170.0±2.0 / 6.69±0.0 mm / in
- Height (H):275.7±2.5 / 10.85±0.10 mm / in
- Design Life:Up to 10 years in standby service at 25°C; Eurobat (20°C): 12+ years, Very Long Life
- Float Charging Voltage:13.5 - 13.8 Vdc/battery
- Equalizing Charging Voltage:14.4 - 15.0 Vdc/battery
- Operating Temperature:discharge -15°C to 50°C; charge/storage -15°C to 40°C
Product details
The CSB XHRL12650W is a 12V valve-regulated sealed lead-acid battery in the XHRL series, a high-performance variant of the HRL series offering higher high-rate output for UPS and data center requirements. The battery uses absorbed glass mat (AGM) technology with gas recombination efficiency up to 99% and a maintenance-free design. Its nominal capacity is 650W @ 15-minute rate (10.02V per PCS @ 25°C), with power of 1054.83 W/cell at the 5-minute rate (1.67 VPC @ 25°C) and 651.83 W/cell at the 15-minute rate.
In terms of electrical parameters, the battery's maximum charge current is 65.00 A, maximum discharge current is 1350 A (5 seconds), short-circuit current is 4018 A, and internal resistance is 2.33 mΩ. Float charge voltage is 13.5 - 13.8 Vdc/battery (25°C), and equalizing charge voltage is 14.4 - 15.0 Vdc/battery (25°C). The battery has a low self-discharge rate, retaining more than 90% capacity after 90 days of storage at 25°C, and can be stored for up to 6 months; storage time can be extended with an equalizing charge every 10 months. It must be fully charged before use, and if storage temperature exceeds 25°C the charging interval should be shortened.
The battery's design life reaches 10 years in 25°C standby service, and over 12 years under the Eurobat standard (20°C). Operating temperature range: nominal 25°C, discharge -15°C to 50°C, charge/storage -15°C to 40°C. Case material is PP (UL 94-HB), with a flame-retardant version (94-V0) available on request. Terminals are I2 threaded lead alloy terminals accepting M6 bolts, with terminal torque of 51.7±10.3 Kgf·cm (44.9±9.0 Lbf·in or 5.1±1.0 N·m).
Battery dimensions are length 343.0±2.5 mm, width 170.0±2.0 mm, height 275.7±2.5 mm, and weight 47.90 kg (105.57 lb). This battery is designed for high-rate UPS and float standby power applications, complies with IEC 60896-21/22:2004, and is recognized under UL1989 (MH14533). Its pure lead construction and proprietary elements ensure reliability and performance.