Product Features

  • Valve Regulated Lead Acid (VRLA) Battery
  • Maintenance-Free, Absorbent Glass Mat (AGM) Technology for Efficient Gas Recombination of up to 99%
  • Pure Lead Construction and Proprietary Elements
  • Designed for High-Rate UPS, Float Service Standby Power Applications
  • Built in Accordance with IEC 60896-21/22:2004 and UL1989 Recognized (MH14533)

Application Scenarios

  • Large data center UPS backup
  • Cloud computing center HVDC backup
  • Financial trading system UPS
  • Telecom hub UPS emergency protection
  • Industrial automation UPS high-power backup
  • Rail transit signal UPS backup

Product parameters

  • Model:HRL12330WG
  • Voltage:12 Vdc
  • Nominal Capacity:330W @ 15min-rate (1.67C) 100AH@ 20hour-rate (1.75V)
  • Watts per Cell:627 (5-Min 1.67 VPC @ 25°)
  • Watts per Cell:356 (15-Min 1.67 VPC @ 25°)
  • Max. Charge Current:33.0A
  • Max. Discharge Current:800 A
  • Short Circuit Current:2386 A
  • Internal Resistance:3.50 mΩ
  • Terminal Type:I2 thread lead alloy terminal to accept M6 bolt
  • Terminal Torque:51.7±10.3 Kgf·cm / 44.9±9.0 Lbf·in / 5.10±1.0 N·m
  • Container Material:PP (UL 94-HB) standard, flame-retardant (94-V0) available upon request
  • Weight:29.60 / 65.24 kg / lb.
  • Length (L):324.7±2.5 / 12.78±0.10 mm / in
  • Width (W):169.0±2.0 / 6.65±0.08 mm / in
  • Height (H):213.6±2.5 / 8.41±0.10 mm / in
  • Design Life:Up to 10 years in standby service at 25°C; Eurobat (20°C): >12 years, Very Long Life
  • Float Charging Voltage:13.5 - 13.8 Vdc/battery
  • Equalizing Charging Voltage:14.4 - 15.0 Vdc/battery
  • Operating Temperature:discharge -15°C to 50°C; charge/storage -15°C to 40°C

Product details

The CSB HRL12330WG belongs to the HRL series of 6V and 12V top terminal valve-regulated sealed lead-acid batteries, utilizing absorbed glass mat (AGM) technology with gas recombination efficiency of up to 99%, and is maintenance-free by design. This model has a nominal voltage of 12 Vdc, a nominal capacity of 100Ah (20-hour rate, 1.75V), 15-minute rate power of 330W (1.67C), 5-minute rate power of 627 W/cell, and 15-minute rate power of 356 W/cell. Its pure lead construction with proprietary formulation is intended for high-rate UPS and float standby power applications. In terms of electrical parameters, the HRL12330WG has a maximum charge current of 33.0A, maximum discharge current of 800 A, short-circuit current of 2386 A, and internal resistance of 3.50 mΩ. Float charge voltage is 13.5 to 13.8 Vdc/battery (25°C), and equalizing charge voltage is 14.4 to 15.0 Vdc/battery (25°C). The terminal uses an I2 threaded lead alloy terminal that accepts an M6 bolt, with recommended torque of 51.7±10.3 Kgf·cm, 44.9±9.0 Lbf·in, or 5.10±1.0 N·m. The battery dimensions are length 324.7±2.5 mm, width 169.0±2.0 mm, height 213.6±2.5 mm, and weight approximately 29.60 kg. The case material is PP (UL 94-HB), with a flame-retardant (94-V0) version available upon request. For operating temperature, the nominal temperature is 25°C, the discharge temperature range is -15°C to 50°C, and the charge and storage temperature range is -15°C to 40°C. The self-discharge rate is less than 10% after 90 days at 25°C, and it can be stored for up to 6 months; a full charge is required before use, and if storage temperature exceeds 25°C, it should be charged earlier. The HRL12330WG has a design life of up to 10 years in float service at 25°C, meeting the Eurobat long life standard (greater than 12 years at 20°C, Very Long Life). The product is manufactured according to IEC 60896-21/22:2004 and is UL1989 recognized (MH14533). Its official application area is data center uninterruptible power supply (Datacenter UPS), suitable for float standby scenarios requiring high power output.
link
Go to purchase
Telephone
13775032303
email
powercube@foxmail.com
wechat
wechat
Loading...