CSB XPL2200 12V High-Capacity Pure Lead VRLA-AGM Battery

Product Features

Valve Regulated Lead Acid (VRLA) Battery
Maintenance-Free, Absorbent Glass Mat (AGM) Technology for Efficient Gas Recombination of up to 99%
Pure Lead Construction and Proprietary Elements
Designed for High-Rate UPS, Float Service Standby Power Applications
Built in Accordance with IEC 60896-21/22:2004 and UL1989 Recognized (MH14533)

Application Scenarios

Data center long-duration UPS backup
Large room long-time backup power
Industrial UPS long-duration discharge backup
Financial system long-duration backup
Telecom hub long-time backup power
Medical center long-duration UPS

Product parameters

Model：XPL2200
Voltage：12 Vdc
Nominal Capacity：2200W @5min-rate
Watts per Cell：563.00 (30-Sec 1.67 VPC @ 25°C)
Watts per Cell：366.17 (5-Min 1.67 VPC @ 25°)
Watts per Cell：201.50 (15-Min 1.67 VPC @ 25°)
Max. Charge Current：18.30 A
Max. Discharge Current：500 A
Short Circuit Current：1344 A
Internal Resistance：5.60 mΩ
Terminal Type：I2 thread lead alloy terminal to accept M6 bolt
Terminal Torque：51.7±10.3 Kgf·cm / 44.9±9.0 Lbf·in / 5.1±1.0 N·m
Container Material：PP (UL 94-HB) standard, flame-retardant (94-V0) available upon request
Weight：16.65 / 36.70 kg / lb.
Length (L)：228.0±2.5 / 8.98±0.10 mm / in
Width (W)：138.4±1.5 / 5.45±0.06 mm / in
Height (H)：206.3±2.5 / 8.12±0.10 mm / in
Design Life：Up to 10 years in standby service at 25°C; Eurobat (20°C): >12 years, Very Long Life
Float Charging Voltage：13.5 - 13.8 Vdc/battery
Equalizing Charging Voltage：14.4 - 15.0 Vdc/battery
Operating Temperature：discharge -15°C to 50°C; charge/storage -15°C to 40°C

Product details

The CSB XPL2200 belongs to the XPL series and is a 12V top terminal valve-regulated sealed lead-acid battery using AGM technology and a pure lead construction. This series targets long-duration standby applications requiring high-capacity single cells, with the official application area being data center uninterruptible power supplies. At 25°C, the battery has a nominal capacity of 2200W @5min-rate, with per-cell power of 563.00 W/cell at 30 seconds to 1.67 VPC, 366.17 W/cell at 5 minutes to 1.67 VPC, and 201.50 W/cell at 15 minutes to 1.67 VPC. In terms of electrical parameters, the XPL2200 has a maximum charge current of 18.30 A, a maximum discharge current of 500 A, a short-circuit current of 1344 A, and an internal resistance of 5.60 mΩ. The float charge voltage is 13.5 to 13.8 Vdc/battery (25°C), and the equalizing charge voltage is 14.4 to 15.0 Vdc/battery (25°C). The battery uses I2 threaded lead alloy terminals, accepts M6 bolts, and has a terminal torque of 51.7±10.3 Kgf∙cm, 44.9±9.0 Lbf∙in, or 5.1±1.0 N∙m. In terms of dimensions and weight, the XPL2200 is 228.0±2.5 mm long, 138.4±1.5 mm wide, and 206.3±2.5 mm high, weighing 16.65 kg (36.70 lb). The case material is PP (UL 94-HB), and a flame-retardant (94-V0) version is also available on request. In terms of design life, it can reach 10 years under float standby service at 25°C, meeting the Eurobat (20°C) ultra-long life classification of greater than 12 years. In terms of operating temperature, the nominal temperature is 25°C, the discharge temperature is -15°C to 50°C, and the charge and storage temperature is -15°C to 40°C. In terms of self-discharge, self-discharge is less than 10% after 90 days at 25°C, storage is possible for up to 6 months, and with equalizing charge, storage is possible for 10 months; the battery must be fully charged before use, and if the storage temperature is above 25°C, it should be charged earlier. The XPL2200 uses a valve-regulated sealed lead-acid design and AGM technology, with gas recombination efficiency of up to 99%, and is maintenance-free. Its pure lead construction and proprietary element design target high-rate UPS and float standby power applications, is manufactured in accordance with IEC 60896-21/22:2004, and is UL1989 recognized (MH14533).