Product Features

  • Valve Regulated Lead Acid (VRLA) Battery
  • Maintenance-Free, Absorbent Glass Mat (AGM) Technology for Efficient Gas Recombination of up to 99%
  • Pure Lead Construction and Proprietary Elements
  • Designed for Float Service Standby Power Applications
  • Built in Accordance with IEC 60896-21/22:2004 and UL1989 Recognized (MH14533)

Application Scenarios

  • Security alarm panel backup power
  • Emergency lighting fixtures and exit signs
  • Medical monitors and infusion pumps backup
  • Access control and building intercom systems
  • Fire alarm and linkage control panels
  • Small electronic instruments and test equipment

Product parameters

  • Model:GP12650
  • Voltage:12 Vdc
  • Nominal Capacity:65 Ah @20hr-rate
  • Ah Capacity:62.9 (8-Hr 1.75 VPC @ 25°C)
  • Ah Capacity:65.0 (20-Hr 1.75 VPC @ 25°C)
  • Ah Capacity:62.1 (8-Hr 1.80 VPC @ 25°C)
  • Max. Charge Current:19.5 A
  • Max. Discharge Current:500 A
  • Short Circuit Current:1663 A
  • Internal Resistance:5.8 mΩ
  • Terminal Type:I2 thread terminal to accept M6 bolt
  • Terminal Torque:51.7±10.3 Kgf·cm / 44.9±9.0 Lbf·in / 5.10±1.0 N·m
  • Container Material:PP (UL 94-HB) standard, flame-retardant (94-V0) available upon request
  • Weight:20.00 / 44.08 kg / lb.
  • Length (L):349.4±2.5 / 13.76±0.10 mm / in
  • Width (W):166.0±2.0 / 6.54±0.08 mm / in
  • Height (H):174.9±2.0 / 6.89±0.08 mm / in
  • Design Life:Up to 5 years in standby service at 25°C; Eurobat (20°C): 3-5 years, Standard Commercial
  • Float Charging Voltage:13.5 - 13.8 Vdc/battery
  • Equalizing Charging Voltage:14.4 - 15.0 Vdc/battery
  • Operating Temperature:discharge -15°C to 50°C; charge/storage -15°C to 40°C

Product details

The CSB GP Series GP12650 is a valve-regulated sealed lead-acid battery with 6V and 12V top terminal configurations, belonging to the general purpose product line. Its nominal voltage is 12 Vdc, with a 20-hour rate nominal capacity of 65 Ah at 25°C and 1.75 VPC, an 8-hour rate capacity of 62.9 Ah, and 62.1 Ah at the 8-hour rate and 1.80 VPC. The battery uses absorbed glass mat (AGM) technology with a gas recombination efficiency of up to 99%, is maintenance-free by design, and is suitable for float standby power applications. In terms of electrical parameters, the GP12650 has a maximum charge current of 19.5 A, a maximum discharge current of 500 A, a short-circuit current of 1663 A, and an internal resistance of 5.8 mΩ. At 25°C, the float charge voltage is 13.5 to 13.8 Vdc, and the equalizing charge voltage is 14.4 to 15.0 Vdc. Regarding self-discharge, storage at 25°C for 90 days results in less than 10% self-discharge, and the battery can be stored for up to 6 months; it must be fully charged before use, and if stored above 25°C, recharge should be performed sooner. Structurally, the battery has I2 terminals that accept M6 bolts, with a terminal torque of 51.7±10.3 Kgf∙cm, 44.9±9.0 Lbf∙in, or 5.10±1.0 N∙m. The case material is PP (UL 94-HB), and a flame-retardant 94-V0 version is available upon request. Dimensions are 349.4±2.5 mm long, 166.0±2.0 mm wide, and 174.9±2.0 mm high, with a weight of 20.00 kg (44.08 lb). Regarding operating temperature, the nominal temperature is 25°C, the discharge temperature range is -15°C to 50°C, and the charge and storage temperature range is -15°C to 40°C. Design life is up to 5 years in float standby service at 25°C, and 3 to 5 years under the Eurobat 20°C standard commercial conditions. The product is manufactured in accordance with IEC 60896-21/22:2004 and is recognized under UL1989 (MH14533). The GP Series is officially positioned as a general purpose VRLA battery series, suitable for a variety of applications such as security, emergency lighting and medical equipment. The GP12650 uses a pure lead construction and proprietary formulation, designed specifically for float standby power applications, and can be used as a backup power source in the above scenarios.
link
Go to purchase
Telephone
13775032303
email
powercube@foxmail.com
wechat
wechat
Loading...